INSTRUCTIONS

Proper operation and maintenance of your professional lighted make up mirror will insure lasting operation for many years.  If for some reason a light or ballast goes out on the makeup mirror within our warrantee period it will be replaced free of charge.  Warrantee does not cover improper use of professional portable lighted make up mirror.

Opening:  Placing your index finger under the tail of one of the latches, pull upward on the tail to open the latch of the make up mirror.  All four latches are opened the same manner.  Remove lid.  An extension cord is stored in the lid of the make up mirror.  You should remove the extension cord at this time.

Setting Up: Place the Portable Lighted Make up Mirror on a table or other suitable surface with the back brace facing to the back.  Extend the back brace away from the case a few inches for support before the lid is removed.

Power:  First, plug one end of the extension cord into the side of the station.  Then plug the other end into a properly grounded 120 Volt power source.  Make sure the cord of the make up mirror is firmly seated.

Power Outlets:  The power outlets on the make up mirror are not switched.  Power is always on to them once the lighted makeup mirror is plugged in.

Light Switches:  The two switches are independent of each other and can be turned on separately or at the same time.

Shipping:  Your make up mirror was designed to be shipped in a car or a van.  Never ship (FEDEX, UPS, Delta, etc.) the make up mirror without placing it in a protective box.  This will ensure that the tubes and mirror will arrive safely at your destination.

For additional information on Maintenance please see our Maintenance Instructions.